2026-10-18T23:43:37Zhttps://ebyu-rdlopen.rawdatalibrary.net/oai/request

oai:ebyu-rdlopen.rawdatalibrary.net:ebyu/108832026-10-18T21:13:12Zopenairedrivercom_ebyu_10000col_ebyu_10001

Fabrication and Characterization of a PZT-Based Touch Sensor Using Combined Spin-Coating and Sputtering MethodsOzden, MelihCoban, OmerKaracali, TevhitBVD modelhybrid depositionimpedancelead zirconate titanate (PZT)RF sputteringspin-coatingtouch sensorCoatingsEquivalent circuitsFabricationFerroelectric ceramicsFilm preparationInterfaces (materials)MorphologyMultilayersPerovskiteSilicon compoundsSpin coatingSputteringSurface morphologysiliconButterworth van dyke modelsLead zirconate titanateLead zirconate-titanatePZTSensing applicationsTouch sensorsarticledegradationdiffusionThis study presents the successful fabrication of lead zirconate titanate (PZT) thin films on silicon (Si) substrates using a hybrid deposition method combining spin-coating and RF sputtering techniques. Initially, a PZT layer was deposited through four successive spin-coating cycles, followed by an additional layer formed via RF sputtering. The resulting multilayer structure was annealed at (Formula presented.) C for 2 h to improve crystallinity. Comprehensive material characterization was conducted using XRD, SEM, cross-sectional SEM, EDX, and UV–VIS absorbance spectroscopy. The analyses confirmed the formation of a well-crystallized perovskite phase, a uniform surface morphology, and an optical band gap of approximately 3.55 eV, supporting its suitability for sensing applications. Building upon these findings, a multilayer PZT-based touch sensor was fabricated and electrically characterized. Low-frequency I–V measurements demonstrated consistent and repeatable polarization behavior under cyclic loading conditions. In addition, (Formula presented.) –f measurements were performed to assess the sensor’s dynamic electrical behavior. Although expected dielectric responses were observed, the absence of distinct anti-resonance peaks suggested non-idealities linked to (Formula presented.) ion diffusion from the electrode layers. To account for these effects, the classical Butterworth–Van Dyke (BVD) equivalent circuit model was extended with additional inductive and resistive components representing parasitic pathways. This modified model provided excellent agreement with the measured impedance and phase data, offering deeper insight into the interplay between material degradation and electrical performance. Overall, the developed sensor structure exhibits strong potential for use in piezoelectric sensing applications, particularly for tactile and pressure-based interfaces. © 2025 by the authors.Multidisciplinary Digital Publishing Institute (MDPI)2025Articlehttps://rdlopen.rawdatalibrary.net/r/ebyu/10883https://doi.org/10.3390/s251339381424-8220enSensorsinfo:eu-repo/semantics/openAccessinfo:eu-repo/semantics/articlehttps://ebyu-rdlopen.rawdatalibrary.net/tr/items/ebyu/10883