2026-10-19T02:47:51Zhttps://ebyu-rdlopen.rawdatalibrary.net/oai/request

oai:ebyu-rdlopen.rawdatalibrary.net:ebyu/162872026-10-18T21:12:10Zopenairedrivercom_ebyu_10000col_ebyu_10001

Potentiometric determination of Cu2+ ions in environmental samples using a newly developed Cu2+-selective electrode based on schiff baseKardas, FarukTopcu, CihanSchiff baseCu2+-selective electrodePotentiometric Cu2+ determinationWater analyzesIMPRINTED POLYMERSENSORCOPPERZINCCADMIUMCOMPLEXEngineering, MultidisciplinaryEngineeringIn this study, we investigated the possibility of preparing ion-selective electrodes for cationic species by using a newly synthesized Schiff base. PVC-membrane compositions in different ratios were prepared by using schiff base complex, polyvinylchloride, o-nitrophenyl octylether and potassiumtetrakis parachlorotetraphenylborate. The prepared membrane compositions were coated on the surfaces of solid state contact electrodes and ion selective electrodes were fabricated. Potentiometric measurements showed that; prepared electrodes exhibited selective behavior towards Cu2+ ions. The most suitable membrane composition of electrode was determined as 3.9% ionophore, 32.0% polyvinylchloride, 64.0% o-nitrophenyl octylether (plasticizer) and 0.1% potassiumtetrakis parachlorotetraphenylborate. The prepared Cu2+-selective electrode showed potentiometric working range to Cu2+ between the concentration of 1.0x10(-5) and 1.0x10(-1) M with a slope of 29.8 +/- 0.7 mV per decade (R-2=0.9966) in the presence of the common cationic species. It was observed that the electrode reached the equilibrium potential within 5 seconds and had a limit of 4.1x10(-6) M. It was tested that the developed electrode exhibited potentiometric behavior at pH = 3.0-8.0 without being affected by the pH change of the test solutions. In addition, the potentiometric Cu2+-selective electrode had 12-week lifetime. The electrode was successfully used in the potentiometric titration of Cu2+ ions with EDTA and the potentiometric determination Cu2+ ions in water samples with different matrix structures such as tap water, river water and dam water.PAMUKKALE UNIV2018Articlehttps://rdlopen.rawdatalibrary.net/r/ebyu/16287https://doi.org/10.5505/pajes.2017.333491300-7009trPAMUKKALE UNIVERSITY JOURNAL OF ENGINEERING SCIENCES-PAMUKKALE UNIVERSITESI MUHENDISLIK BILIMLERI DERGISIinfo:eu-repo/semantics/openAccessinfo:eu-repo/semantics/articlehttps://ebyu-rdlopen.rawdatalibrary.net/tr/items/ebyu/16287