CO gas sensing properties of Cd(OH)2/CdO thin films synthesized by SILAR method

ArticleAçık Erişim

Özet

Cd(OH)2/CdO thin films were synthesized on glass substrates by the SILAR method at 30, 40, and 50 SILAR cycles. The effects of the SILAR cycle and sensor operating temperature on the structural, morphological, and CO gas-sensing properties of the films were investigated. XRD studies revealed that synthesized films had a polycrystalline hexagonal phase of Cd(OH)2, and after static gas sensing measurements, the hexagonal phase was transformed to cubic phase of CdO with the effect of operating temperature. SEM analyses confirmed the phase conversion and showed that the morphological properties of films improved with operating temperature. Cd(OH)2/CdO thin film-based sensors were fabricated and static-dynamic gas sensing measurements were made towards CO gas. The detection limit and operating temperature values of sensors were determined. The optimal operating temperature was found to be 157 °C for all sensors. The CO sensing results demonstrated that the sensor with 40 SILAR cycles has the highest sensitivity for 50–500 ppm CO gas concentration values at 157 °C compared to the others. The sensing responses of sensors increased from 24% to 40% for 50 ppm CO gas and from 44% to 69% for 500 ppm CO gas at 157 °C, depending on SILAR cycle. The activation energy (Ea) values of sensors were found to change between 0.396–0.684 eV in the Cd(OH)2 phase regions and 0.495–0.912 eV in the CdO phase regions, with the SILAR cycle. The response and recovery times of sensor with 40 SILAR cycles were found to be 84.2 s and 40.8 s for 50 ppm CO gas at 157 °C, respectively. Furthermore, the sensor demonstrated excellent selectivity to CO gas compared to CO2, CH4, and NH3 gases. Finally, our findings highlight the potential of Cd(OH)2/CdO nanomaterials synthesized using a simple process and in different SILAR cycles as a promising material to enhance the sensing properties of CO gas sensors. Graphical Abstract: (Figure presented.) © The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature 2024.

Anahtar Kelimeler

RDL Kalıcı Bağlantı (PID)
https://rdlopen.rawdatalibrary.net/r/ebyu/11993Resmi atıflarda kullanılan kalıcı adres
DOI
https://doi.org/10.1007/s10971-023-06298-1Yayıncı resmi DOI adresi
Tam Kayıt
AlanDeğerDil
dc.contributor.authorMüezzinoğlu, Esra Demet
dc.contributor.authorTuna Yıldırım, Sümeyra
dc.contributor.authorÇağırtekin, Ali Orkun
dc.contributor.authorAteş, Aytunç
dc.contributor.authorAcar, Selim
dc.contributor.authorYıldırım, M. Ali
dc.date.accessioned2026-10-18T20:26:57.661446215Z
dc.date.available2026-10-18T20:26:57.661446215Z
dc.date.issued2024
dc.description.abstractCd(OH)2/CdO thin films were synthesized on glass substrates by the SILAR method at 30, 40, and 50 SILAR cycles. The effects of the SILAR cycle and sensor operating temperature on the structural, morphological, and CO gas-sensing properties of the films were investigated. XRD studies revealed that synthesized films had a polycrystalline hexagonal phase of Cd(OH)2, and after static gas sensing measurements, the hexagonal phase was transformed to cubic phase of CdO with the effect of operating temperature. SEM analyses confirmed the phase conversion and showed that the morphological properties of films improved with operating temperature. Cd(OH)2/CdO thin film-based sensors were fabricated and static-dynamic gas sensing measurements were made towards CO gas. The detection limit and operating temperature values of sensors were determined. The optimal operating temperature was found to be 157 °C for all sensors. The CO sensing results demonstrated that the sensor with 40 SILAR cycles has the highest sensitivity for 50–500 ppm CO gas concentration values at 157 °C compared to the others. The sensing responses of sensors increased from 24% to 40% for 50 ppm CO gas and from 44% to 69% for 500 ppm CO gas at 157 °C, depending on SILAR cycle. The activation energy (Ea) values of sensors were found to change between 0.396–0.684 eV in the Cd(OH)2 phase regions and 0.495–0.912 eV in the CdO phase regions, with the SILAR cycle. The response and recovery times of sensor with 40 SILAR cycles were found to be 84.2 s and 40.8 s for 50 ppm CO gas at 157 °C, respectively. Furthermore, the sensor demonstrated excellent selectivity to CO gas compared to CO2, CH4, and NH3 gases. Finally, our findings highlight the potential of Cd(OH)2/CdO nanomaterials synthesized using a simple process and in different SILAR cycles as a promising material to enhance the sensing properties of CO gas sensors. Graphical Abstract: (Figure presented.) © The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature 2024.
dc.identifier.doi10.1007/s10971-023-06298-1
dc.identifier.eissn1573-4846
dc.identifier.endpage653
dc.identifier.issn0928-0707
dc.identifier.issue3
dc.identifier.scopus2-s2.0-85181515846
dc.identifier.startpage639
dc.identifier.urihttps://rdlopen.rawdatalibrary.net/r/ebyu/11993
dc.identifier.volume109
dc.identifier.wosWOS:001136127500003
dc.language.isoen
dc.publisherSpringer
dc.relation.ispartofJournal of Sol-Gel Science and Technology
dc.rightsinfo:eu-repo/semantics/openAccess
dc.subjectCd(OH)<sub>2</sub>/CdO
dc.subjectCO gas
dc.subjectGas sensor
dc.subjectOptimization
dc.subjectSILAR
dc.subjectActivation energy
dc.subjectAmmonia
dc.subjectCadmium compounds
dc.subjectChemical detection
dc.subjectChemical sensors
dc.subjectGas detectors
dc.subjectGlass substrates
dc.subjectTemperature
dc.subjectThin films
dc.subjectCd(OH)2/CdO
dc.subjectCdO thin films
dc.subjectGas sensing properties
dc.subjectGas-sensors
dc.subjectOperating temperature
dc.subjectOptimisations
dc.subjectSILAR method
dc.subjectSynthesised
dc.subjectGases
dc.titleCO gas sensing properties of Cd(OH)2/CdO thin films synthesized by SILAR method
dc.typeArticle
dspace.entity.typePublication
rdl.citation.scopus3
rdl.citation.wos4
rdl.source.indexSCOPUS
rdl.source.indexWOS
rdl.wos.indexScience Citation Index Expanded (SCI-EXPANDED)