The effect of post aging on wear properties of a plasma nitrided ferromagnetic steel under DC magnetic field

ArticleAçık Erişim

Özet

Plasma nitriding is an effective surface treatment to improve unsatisfactory wear properties of machine elements. Such machine elements may also subject to magnetic fields in many industrial applications. Therefore, AISI 4140 ferromagnetic steel samples were plasma nitrided. Then, the samples were quenched in water and then post-aged at a temperature of 400°C for 30 and 120min in plasma environment. Reciprocating wear tests were performed under different oriented DC magnetic field to determine wear behavior of the samples. It was obtained that the magnetic field and its orientation during wear test were the most effective parameters on wear behavior. It was observed that post-aged samples showed better wear resistance and lower friction coefficient values than the merely nitrided samples. Hard Fe16N2 precipitations were formed in the nitrided layer after post-aging treatment and their amount increased with magnetic field. This gave rise to improvement the wear resistance. © 2015 Elsevier B.V.

Anahtar Kelimeler

RDL Kalıcı Bağlantı (PID)
https://rdlopen.rawdatalibrary.net/r/ebyu/15468Resmi atıflarda kullanılan kalıcı adres
DOI
https://doi.org/10.1016/j.wear.2015.02.035Yayıncı resmi DOI adresi
Tam Kayıt
AlanDeğerDil
dc.contributor.authorYetim, A.F.
dc.contributor.authorKovaci, H.
dc.contributor.authorYildiz, F.
dc.contributor.authorBayrak, O.
dc.contributor.authorÇelik, A.
dc.date.accessioned2026-10-18T20:30:18.737969472Z
dc.date.available2026-10-18T20:30:18.737969472Z
dc.date.issued2015
dc.description.abstractPlasma nitriding is an effective surface treatment to improve unsatisfactory wear properties of machine elements. Such machine elements may also subject to magnetic fields in many industrial applications. Therefore, AISI 4140 ferromagnetic steel samples were plasma nitrided. Then, the samples were quenched in water and then post-aged at a temperature of 400°C for 30 and 120min in plasma environment. Reciprocating wear tests were performed under different oriented DC magnetic field to determine wear behavior of the samples. It was obtained that the magnetic field and its orientation during wear test were the most effective parameters on wear behavior. It was observed that post-aged samples showed better wear resistance and lower friction coefficient values than the merely nitrided samples. Hard Fe16N2 precipitations were formed in the nitrided layer after post-aging treatment and their amount increased with magnetic field. This gave rise to improvement the wear resistance. © 2015 Elsevier B.V.
dc.identifier.doi10.1016/j.wear.2015.02.035
dc.identifier.eissn1873-2577
dc.identifier.endpage994
dc.identifier.issn0043-1648
dc.identifier.scopus2-s2.0-84937821106
dc.identifier.startpage988
dc.identifier.urihttps://rdlopen.rawdatalibrary.net/r/ebyu/15468
dc.identifier.volume332-333
dc.identifier.wosWOS:000357438100043
dc.language.isoen
dc.publisherElsevier Ltd
dc.relation.ispartofWear
dc.rightsinfo:eu-repo/semantics/openAccess
dc.subjectMagnetic field
dc.subjectPlasma nitriding
dc.subjectPlasma post-aging
dc.subjectSliding wear
dc.subjectWear Debris
dc.subjectFerromagnetic materials
dc.subjectFerromagnetism
dc.subjectFriction
dc.subjectMagnetic fields
dc.subjectMagnetism
dc.subjectNitriding
dc.subjectNitrogen plasma
dc.subjectPlasma applications
dc.subjectStainless steel
dc.subjectSurface treatment
dc.subjectWear of materials
dc.subjectWear resistance
dc.subjectEffective parameters
dc.subjectFerromagnetic steel
dc.subjectFriction coefficients
dc.subjectPlasma environments
dc.subjectReciprocating wear test
dc.subjectMagnetoplasma
dc.titleThe effect of post aging on wear properties of a plasma nitrided ferromagnetic steel under DC magnetic field
dc.typeArticle
dspace.entity.typePublication
rdl.citation.scopus30
rdl.citation.wos25
rdl.source.indexSCOPUS
rdl.source.indexWOS
rdl.wos.indexScience Citation Index Expanded (SCI-EXPANDED)
rdl.wos.indexConference Proceedings Citation Index - Science (CPCI-S)