A new boost converter-based soft switched active snubber cell for power factor correction

ArticleAçık Erişim

Özet

This paper introduces a new boost converter-based soft switched active snubber cell for power factor correction. In this particular converter, the main switch is turned on through Zero Voltage Transition (ZVT) and is turned off with the aid of Zero Voltage Switching (ZVS). The main diode is turned on using ZVS and is turned off using Zero Current Switching (ZCS). In the active snubber cell, the auxiliary switch is turned on by means of ZCS and is turned off using Zero Current Transition (ZCT). No semiconductor device is exposed to additional voltage stress. In this paper, theoretical analysis of the proposed converter is exhibited and validated by both simulation and experimental studies while operating at 100 kHz switching frequency and 600 W output power. It is demonstrated that the proposed converter is of 95.7% efficiency and 0.99 unit power factor in the soft-switching operation. © 2021 Sharif University of Technology.

Anahtar Kelimeler

RDL Kalıcı Bağlantı (PID)
https://rdlopen.rawdatalibrary.net/r/ebyu/13207Resmi atıflarda kullanılan kalıcı adres
Tam Kayıt
AlanDeğerDil
dc.contributor.authorTing, N. Suleyman
dc.contributor.authorSahin, Y.
dc.contributor.authorYetgin, H.
dc.date.accessioned2026-10-18T20:28:02.783128377Z
dc.date.available2026-10-18T20:28:02.783128377Z
dc.date.issued2021
dc.description.abstractThis paper introduces a new boost converter-based soft switched active snubber cell for power factor correction. In this particular converter, the main switch is turned on through Zero Voltage Transition (ZVT) and is turned off with the aid of Zero Voltage Switching (ZVS). The main diode is turned on using ZVS and is turned off using Zero Current Switching (ZCS). In the active snubber cell, the auxiliary switch is turned on by means of ZCS and is turned off using Zero Current Transition (ZCT). No semiconductor device is exposed to additional voltage stress. In this paper, theoretical analysis of the proposed converter is exhibited and validated by both simulation and experimental studies while operating at 100 kHz switching frequency and 600 W output power. It is demonstrated that the proposed converter is of 95.7% efficiency and 0.99 unit power factor in the soft-switching operation. © 2021 Sharif University of Technology.
dc.identifier.doi10.24200/sci.2019.50087.1500
dc.identifier.endpage3351
dc.identifier.issn1026-3098
dc.identifier.issue6D
dc.identifier.scopus2-s2.0-85122296885
dc.identifier.startpage3342
dc.identifier.urihttps://rdlopen.rawdatalibrary.net/r/ebyu/13207
dc.identifier.volume28
dc.identifier.wosWOS:000747222900006
dc.language.isoen
dc.publisherSharif University of Technology
dc.relation.ispartofScientia Iranica
dc.rightsinfo:eu-repo/semantics/openAccess
dc.subjectActive snubber cell
dc.subjectHard switching
dc.subjectPower factor correction
dc.subjectSoft switching
dc.subjectZero voltage transition
dc.subjectCytology
dc.subjectDC-DC converters
dc.subjectElectric power factor correction
dc.subjectSemiconductor devices
dc.subjectZero current switching
dc.subjectZero voltage switching
dc.subjectActive snubber
dc.subjectBOOST converter
dc.subjectPower factor corrections
dc.subjectSoft-switched
dc.subjectSoft-switching
dc.subjectZero- Voltage Switching
dc.subjectZero-current switching
dc.subjectfactor analysis
dc.subjectsemiconductor industry
dc.subjectsimulation
dc.subjectCells
dc.titleA new boost converter-based soft switched active snubber cell for power factor correction
dc.typeArticle
dspace.entity.typePublication
rdl.citation.scopus1
rdl.citation.wos1
rdl.oa.statusgold
rdl.source.indexSCOPUS
rdl.source.indexWOS
rdl.wos.indexScience Citation Index Expanded (SCI-EXPANDED)