Erzincan Binali Yıldırım ÜniversitesiErzincan Binali Yıldırım ÜniversitesiAçık Erişim Arşivi · RDL Open

Friction and Wear Behaviors of TiN Coatings under Dry and Vacuum Conditions

ArticleAçık Erişim

Özet

In this study, pure TiN coatings were applied on AISI 52100 steel surfaces with a magnetron sputterer at different direct current (DC) powers and N2 flows to develop a wear-resistant coating for sliding tribopairs working in atmospheric and vacuum conditions. Wear and friction characteristics of these coatings were investigated with a tribometer under both vacuum and atmospheric conditions. DC power and N2 flow affected the coating thickness and structure. TiN coatings showed different wear and friction characteristics under ambient and vacuum conditions due to the oxidation level of the surface. © 2019, © 2019 Society of Tribologists and Lubrication Engineers.

Anahtar Kelimeler

magnetron sputtering coatingTiN coatingvacuum conditionWear and frictionCoatingsFrictionThickness measurementTitanium nitrideWear of materialsAtmospheric conditionsCoating thicknessFriction and wear behaviorsOxidation levelWear-resistant coatingTitanium alloys
RDL Kalıcı Bağlantı (PID)
https://rdlopen.rawdatalibrary.net/r/ebyu/13873Resmi atıflarda kullanılan kalıcı adres
Tam Kayıt
AlanDeğerDil
dc.contributor.authorKara, Levent
dc.contributor.authorÖzkan, Doğuş
dc.contributor.authorBarış Yağcı, M.
dc.contributor.authorSulukan, Egemen
dc.contributor.authorSert, Yaşar
dc.contributor.authorSonsuz Sert, Tugay
dc.date.accessioned2026-10-18T20:28:40.695591131Z
dc.date.available2026-10-18T20:28:40.695591131Z
dc.date.issued2019
dc.description.abstractIn this study, pure TiN coatings were applied on AISI 52100 steel surfaces with a magnetron sputterer at different direct current (DC) powers and N2 flows to develop a wear-resistant coating for sliding tribopairs working in atmospheric and vacuum conditions. Wear and friction characteristics of these coatings were investigated with a tribometer under both vacuum and atmospheric conditions. DC power and N2 flow affected the coating thickness and structure. TiN coatings showed different wear and friction characteristics under ambient and vacuum conditions due to the oxidation level of the surface. © 2019, © 2019 Society of Tribologists and Lubrication Engineers.
dc.description.sponsorshipThe authors thank Koç University Surface Science and Technology Centre (KUYTAM) for surface analyses.
dc.identifier.doi10.1080/10402004.2018.1559385
dc.identifier.eissn1547-397X
dc.identifier.endpage373
dc.identifier.issn1040-2004
dc.identifier.issue3
dc.identifier.scopus2-s2.0-85062364550
dc.identifier.startpage362
dc.identifier.urihttps://rdlopen.rawdatalibrary.net/r/ebyu/13873
dc.identifier.volume62
dc.identifier.wosWOS:000469106100003
dc.language.isoen
dc.publisherTaylor and Francis Inc.
dc.relation.ispartofTribology Transactions
dc.rightsinfo:eu-repo/semantics/openAccess
dc.subjectmagnetron sputtering coating
dc.subjectTiN coating
dc.subjectvacuum condition
dc.subjectWear and friction
dc.subjectCoatings
dc.subjectFriction
dc.subjectThickness measurement
dc.subjectTitanium nitride
dc.subjectWear of materials
dc.subjectAtmospheric conditions
dc.subjectCoating thickness
dc.subjectFriction and wear behaviors
dc.subjectOxidation level
dc.subjectWear-resistant coating
dc.subjectTitanium alloys
dc.titleFriction and Wear Behaviors of TiN Coatings under Dry and Vacuum Conditions
dc.typeArticle
dspace.entity.typePublication
rdl.citation.scopus22
rdl.citation.wos19
rdl.source.indexSCOPUS
rdl.source.indexWOS
rdl.wos.indexScience Citation Index Expanded (SCI-EXPANDED)