A soft switching single phase power factor correction AC-DC boost converter with passive snubber

Conference ObjectAçık Erişim

Özet

This paper introduces a new soft switching single phase power factor correction (PFC) boost converter with passive snubber. In the proposed converter, the main switch is turned on under zero current switching (ZCS) and turned off under zero voltage switching (ZVS) owing to the proposed passive snubber. Besides, the main diode is turned on under ZVS and turned off under ZCS. The proposed converter has features such as low cost, simple control, low number of element and high power density. Also, the output current and voltage are controlled by the proposed PFC converter in wide line and load range. The operating modes of the proposed converter are presented in detail. Also, the simulation results of converter are obtained for 1 kW and 100 kHz. It is observed that the new proposed converter has 0.99 power factor with sinusoidal current shape. So, power factor quality is fairly high. © 2017 IEEE.

Anahtar Kelimeler

RDL Kalıcı Bağlantı (PID)
https://rdlopen.rawdatalibrary.net/r/ebyu/14592Resmi atıflarda kullanılan kalıcı adres
DOI
https://doi.org/10.1109/iceee2.2017.7935784Yayıncı resmi DOI adresi
Tam Kayıt
AlanDeğerDil
dc.contributor.authorTing, Naim Suleyman
dc.contributor.authorAltintas, Nihan
dc.date.accessioned2026-10-18T20:29:23.742402464Z
dc.date.available2026-10-18T20:29:23.742402464Z
dc.date.issued2017
dc.description.abstractThis paper introduces a new soft switching single phase power factor correction (PFC) boost converter with passive snubber. In the proposed converter, the main switch is turned on under zero current switching (ZCS) and turned off under zero voltage switching (ZVS) owing to the proposed passive snubber. Besides, the main diode is turned on under ZVS and turned off under ZCS. The proposed converter has features such as low cost, simple control, low number of element and high power density. Also, the output current and voltage are controlled by the proposed PFC converter in wide line and load range. The operating modes of the proposed converter are presented in detail. Also, the simulation results of converter are obtained for 1 kW and 100 kHz. It is observed that the new proposed converter has 0.99 power factor with sinusoidal current shape. So, power factor quality is fairly high. © 2017 IEEE.
dc.identifier.doi10.1109/iceee2.2017.7935784
dc.identifier.endpage17
dc.identifier.isbn978-150906788-6
dc.identifier.scopus2-s2.0-85025670534
dc.identifier.startpage13
dc.identifier.urihttps://rdlopen.rawdatalibrary.net/r/ebyu/14592
dc.language.isoen
dc.publisherInstitute of Electrical and Electronics Engineers Inc.
dc.relation.ispartof2017 4th International Conference on Electrical and Electronics Engineering, ICEEE 2017
dc.rightsinfo:eu-repo/semantics/openAccess
dc.subjectPassive snubber cell
dc.subjectPower factor correction
dc.subjectSoft switching
dc.subjectZero-current transition
dc.subjectZero-voltage transition
dc.subjectDC-DC converters
dc.subjectElectric power factor correction
dc.subjectPower converters
dc.subjectRectifying circuits
dc.subjectSwitching
dc.subjectZero current switching
dc.subjectBOOST converter
dc.subjectHigh power density
dc.subjectPassive snubbers
dc.subjectPower factor corrections
dc.subjectSingle-phase power
dc.subjectSinusoidal currents
dc.subjectZero voltage transition
dc.subjectZero-current transitions
dc.subjectZero voltage switching
dc.titleA soft switching single phase power factor correction AC-DC boost converter with passive snubber
dc.typeConference Object
dspace.entity.typePublication
rdl.citation.scopus1
rdl.source.indexSCOPUS