Design and application of a novel snubber cell for soft switched pwm dc–dc converters

ArticleAçık Erişim

Özet

This paper introduces a novel active snubber cell for soft switching PWM DC–DC converters. In the proposed converter, the main switch is turned on under zero voltage transition (ZVT) and turned off under zero voltage switching (ZVS). The auxiliary switch and all of the other semiconductors in the converter are turned on and off with soft switching (SS). There is no extra voltage stress on the semiconductor devices. Besides, the proposed converter has simple structure and ease of control due to common ground. In this treatise, the theoretical and mathematical analysis of the proposed converter are presented and the design procedure of converters is also provided. The simulation study at 100 kHz switching frequency and 600 W output power are conducted. The experimental prototype of converter is operated under same conditions. Both the simulation and the experimental prototype exhibits similar performances. Ultimately, the efficiency of the proposed converter is 95.7% at nominal power. © 2019, Indian Academy of Sciences.

Anahtar Kelimeler

RDL Kalıcı Bağlantı (PID)
https://rdlopen.rawdatalibrary.net/r/ebyu/13930Resmi atıflarda kullanılan kalıcı adres
DOI
https://doi.org/10.1007/s12046-018-1043-3Yayıncı resmi DOI adresi
Tam Kayıt
AlanDeğerDil
dc.contributor.authorSahin, Yakup
dc.contributor.authorTing, Naim Suleyman
dc.date.accessioned2026-10-18T20:28:44.004943952Z
dc.date.available2026-10-18T20:28:44.004943952Z
dc.date.issued2019
dc.description.abstractThis paper introduces a novel active snubber cell for soft switching PWM DC–DC converters. In the proposed converter, the main switch is turned on under zero voltage transition (ZVT) and turned off under zero voltage switching (ZVS). The auxiliary switch and all of the other semiconductors in the converter are turned on and off with soft switching (SS). There is no extra voltage stress on the semiconductor devices. Besides, the proposed converter has simple structure and ease of control due to common ground. In this treatise, the theoretical and mathematical analysis of the proposed converter are presented and the design procedure of converters is also provided. The simulation study at 100 kHz switching frequency and 600 W output power are conducted. The experimental prototype of converter is operated under same conditions. Both the simulation and the experimental prototype exhibits similar performances. Ultimately, the efficiency of the proposed converter is 95.7% at nominal power. © 2019, Indian Academy of Sciences.
dc.identifier.doi10.1007/s12046-018-1043-3
dc.identifier.eissn0973-7677
dc.identifier.issn0256-2499
dc.identifier.issue3
dc.identifier.scopus2-s2.0-85062091781
dc.identifier.startpage71
dc.identifier.urihttps://rdlopen.rawdatalibrary.net/r/ebyu/13930
dc.identifier.volume44
dc.identifier.wosWOS:000459826200003
dc.language.isoen
dc.publisherSpringer
dc.relation.ispartofSadhana - Academy Proceedings in Engineering Sciences
dc.rightsinfo:eu-repo/semantics/openAccess
dc.subjectActive snubber cell
dc.subjecthard switching
dc.subjectsoft switching
dc.subjectzero current transition
dc.subjectzero voltage transition
dc.subjectDesign
dc.subjectPower converters
dc.subjectSemiconductor devices
dc.subjectActive snubber
dc.subjectDesign and application
dc.subjectExperimental prototype
dc.subjectMathematical analysis
dc.subjectSimulation studies
dc.subjectZero-current transitions
dc.subjectZero voltage switching
dc.titleDesign and application of a novel snubber cell for soft switched pwm dc–dc converters
dc.typeArticle
dspace.entity.typePublication
rdl.citation.scopus2
rdl.citation.wos2
rdl.source.indexSCOPUS
rdl.source.indexWOS
rdl.wos.indexScience Citation Index Expanded (SCI-EXPANDED)