The experimental investigation of seepage control in different sand soils using photopolymerization

Seepage control is critically essential for dams, slopes, and the stability of many engineering structures, developing over many years using different methods. This study presents a novel approach for seepage control using the photopolymerization technique to form an impermeable crust at the soil surface. Effects of exposure duration (5, 10, 15, and 30 min) and light intensities (140, 550, 710, and 1000 W/m2) on the seepage control effectiveness of four different sand soils were investigated by using the photopolymerization technique. The three-point bending, permeability and acid rain simulation tests were performed to illustrate the effect of photopolymerization on the seepage control of sand soils. Furthermore, the influence of photopolymerization on the microstructure of soils was examined with the aid of SEM analysis. The results indicated that the photopolymerization technique could improve the crust strength, acid rain durability, and permeability of sand soils. The crusts at the surface layer of soils were formed after the photopolymer was applied to the sand surface and then exposed to UV light. These crusts of different soils have bending strengths and thicknesses in the range of 34.57 and 68.07 MPa, 2.13 and 6.18 mm, respectively. The increase in exposure duration and light intensity, resulted in the gradual increment of soil crust thickness. On the other hand, the increase in light intensities have more effective on the crust thickness. The formed soil crust has been provided an impermeable surface that prevents the weight loose from the surface of the soil under acid rain conditions. The SEM analysis indicated that the photopolymerized gels were homogeneously distributed between the grains in all samples, although the grain distribution of soils were different. Since the photopolymerization method has a short treatment duration and is easier to apply on the sand surface, the occurrence of the crust at the soil surface by this technique may open a new and improvable path for seepage control. The obtained results showed that the photopolymerization method is promising for repairing, restoring, and strengthening the construction materials in different engineering areas, as well as seepage control. © The Author(s) under exclusive licence to Institute of Geophysics, Polish Academy of Sciences & Polish Academy of Sciences 2023.