Effective atomic numbers for CoCuNi alloys using transmission experiments

ArticleAçık Erişim

Özet

Effective atomic numbers for CuCoNi alloys against changing Ni contents were measured in the X-ray energy range from 15.746 to 40.930 keV. The gamma rays emitted a 241Am point source have been send on absorbers to be used transmission arrangement. The X-rays were counted by a Si(Li) detector with a resolution of 160 eV at 5.9 keV. The compositions of the Ni films were determined to be 0.03, 0.47, 0.62, 1.23, 1.22 and 1.6 by a scanning electron microscopy in CuCoNi alloys prepared against changing Ni contents. CoCuNi alloy films were prepared with an electrodeposition technique. Also, the total effective atomic numbers of each alloy were estimated using mixture rule. The measured values were compared with estimated values for alloys. © 2004 Elsevier Ltd. All rights reserved.

Anahtar Kelimeler

RDL Kalıcı Bağlantı (PID)
https://rdlopen.rawdatalibrary.net/r/ebyu/16122Resmi atıflarda kullanılan kalıcı adres
DOI
https://doi.org/10.1016/j.jqsrt.2004.07.006Yayıncı resmi DOI adresi
Tam Kayıt
AlanDeğerDil
dc.contributor.authorI̧elli, Orhan
dc.contributor.authorErzeneoǧlu, Salih
dc.contributor.authorKarahan, Ismail H.
dc.contributor.authorÇankaya, Güven
dc.date.accessioned2026-10-18T20:30:56.570767860Z
dc.date.available2026-10-18T20:30:56.570767860Z
dc.date.issued2005
dc.description.abstractEffective atomic numbers for CuCoNi alloys against changing Ni contents were measured in the X-ray energy range from 15.746 to 40.930 keV. The gamma rays emitted a 241Am point source have been send on absorbers to be used transmission arrangement. The X-rays were counted by a Si(Li) detector with a resolution of 160 eV at 5.9 keV. The compositions of the Ni films were determined to be 0.03, 0.47, 0.62, 1.23, 1.22 and 1.6 by a scanning electron microscopy in CuCoNi alloys prepared against changing Ni contents. CoCuNi alloy films were prepared with an electrodeposition technique. Also, the total effective atomic numbers of each alloy were estimated using mixture rule. The measured values were compared with estimated values for alloys. © 2004 Elsevier Ltd. All rights reserved.
dc.identifier.doi10.1016/j.jqsrt.2004.07.006
dc.identifier.endpage491
dc.identifier.issn0022-4073
dc.identifier.issue4
dc.identifier.scopus2-s2.0-6444220689
dc.identifier.startpage485
dc.identifier.urihttps://rdlopen.rawdatalibrary.net/r/ebyu/16122
dc.identifier.volume91
dc.language.isoen
dc.relation.ispartofJournal of Quantitative Spectroscopy and Radiative Transfer
dc.rightsinfo:eu-repo/semantics/openAccess
dc.subjectCoCuNi alloys
dc.subjectEffective atomic numbers
dc.subjectElectrodeposited alloy
dc.subjectMass attenuation coefficients
dc.subjectCopper alloys
dc.subjectElectrodeposition
dc.subjectGamma rays
dc.subjectNickel
dc.subjectParameter estimation
dc.subjectX rays
dc.subjectalloy
dc.subjectelectrochemistry
dc.subjectscanning electron microscopy
dc.subjectAtomic numbers
dc.subjectMixture rule
dc.subjectX-ray energy
dc.subjectCobalt alloys
dc.titleEffective atomic numbers for CoCuNi alloys using transmission experiments
dc.typeArticle
dspace.entity.typePublication
rdl.citation.scopus43
rdl.source.indexSCOPUS